EPON ONU 1GE+WIFI
Introduction
EPON and GPON are popular versions of passive optical networks
(PONs). EPON is Fast Ethernet (100 Mbps) PON, while GPON is Giga
bits Ethernet (10 Gbps) PON. POWERLINK's fiber optical access
series of devices for the last-mile PON include OLT (Optical Line
Terminal), ONU (Optical Network Unit) & ONT (Optical Network
Termination), PON Splitters (PLC & FBT). We are proudly launching a
series of integrated, high reliability and affordable EPON/GPON/ODN
splitter solutions for all our customers to meet with fast growing
demand of PON deployment.
ONU (Optical Network Unit) and ONT (Optical Network Termination) –
ONU and ONT are basically the same device – ONT is located at the
customer premise, and ONU is located outside the home. ONU can be
working in different temperature and weather conditions. It should
resist water, winds and vandals. The ONU usually communicates with
an optical network terminal (ONT), which may be a separate box that
connects the PON to TV sets, telephones, computers, or a wireless
router. The ONU/ONT may be one device.
Epon/Gpon is designed to meet the FTTH broadband access, fiber to
the desk (FTTO). high reliability, easy management and excellent
quality of service (QoS) guarantee
ONU/ONT products fully comply with IEEE 802.3-2005 and the China
Telecom EPON/GPON device technical specification (V2.1). It is
operative, manageable and maintainable at telecommunication level,
and can provide high speed data service for customers. It has a PON
uplink port that connects to office end apparatus through optical
fiber.
Characteristics
Conform to ITU-T G.984 GPON standards.
Support Ethernet service layer 2 switching and wire-speed
forwarding of uplink and downlink services
Support frame filtering and suppression
Support standard 802.1Q Vlan function, support VLAN conversion
Support 4094 VLANs (802.1Q)
Support Dynamic Bandwidth Allocation (DBA) function
Support QoS, including traffic flow classification, priority
marking, queue and dispatch, traffic shaping and traffic control,
etc
Single ONU supports up to 1 LLID.
Support IGMP Snooping
Support Ethernet port ratelimit loop detection
Support power failure alarm
Support lightning protection for power supply and lightning
protection for service port
Complies with 2.4GHz IEEE802.11n v2.0 and backward compatible with
IEEE 802.11b/g standards
Supports NAT/NAPT IP sharing
WAN Protocols: PPPoE/StaticIP/PPTP/DHCP
Supports advanced 2T2R MIMO technology to enhance the throughput
and coverage range significantly
High speed data rate - up to 300Mbps
Port features:
1 PON ports (2.5G)
1 10/100/1000M port
1 WLAN Port
Physical features:
Power supply: 12VDC
Power consumption: 6W
Temperature:
>Working temperature:0~55℃
>Storage temperature: -30~60℃
>Relative humidity: 10~90% (non-condensing)
Specifiaction
| Parameter Name | Hardware Parameter |
| EPON |
| PON | SC single-mode/single-fiber, symmetric 1.25Gbps |
| Wavelength | Tx 1310nm, Rx 1490nm |
| Sensitivity | <-27dBm(PX20+) |
| Overload | >-3dBm(PX20+) |
| Optical Type | SC/PC |
| Interface Type | 1*10/100/1000Mbps |
| Auto adaptive Ethernet interfaces, Full/Half Duplex, RJ45 connector |
| Wireless | Compliant with IEEE802.11b/g/n, 300Mbps, |
| 2T2R one external antenna and one internal antenna |
| Indicators | 5, For WiFi,LINK,REG,LOS,POWER |
| Power adapter input | 220V AC,50HZ |
| Ambient temperature | 0℃ ~ +55℃ |
| Ambient humidity | 10% ~ 90%(non-condensing) |
| Store temperature | -30 ~ +60℃ |
| Store humidity | 10% ~ 90%(non-condensing) |
| Dimension(L x W x H) | 120mm×78mm×30mm + External antenna |
| Power | 12V,0.5A |
| Power Consumption | ≤5.3W |
Show
