SC UPC SM MM Fiber Optic Sumitomo Fast/Quick Connector 52~55mm
length
Description:
The fast connector is a connector that can well solve the wiring
operation and the FTTH project. Assembly without glue, grinding and
electrical tools ,which is widely used in the construction site. It
provides a fast and stable connector for operation.
Optical Fast Connector takes use of the latest generation of
Terminal technology. After terminating, both optical and mechanical
performance reach the standard for patchcord, meet the demand for
making patchcord on site by mechanical splicing, have greatly
changed the idea in conventional optical splicing, providing the
great support to FTTx implementation.
Specification:
| Singemode(UPC) | Singemode(APC) | Multimode |
| Insertion loss | ≤ 0.2db | ≤ 0.2db | ≤ 0.25db |
| Return loss | ≥55db | ≥65db | ≥30db |
| Durability | ≤ 0.2db typical change, 1000 times mating |
| Operating Temperature | -45 to +85 degree |
| Ferrule Hole Sizes | 125.0+1/-0um, Concertricity:≤1.0um | 125.0+1/-0um, Concertricity:≤0.5um | 127.0um, Concertricity: ≤3.0um |
| 125.5+1/-0um, Concertricity:≤1.0um | 125.5+1/-0um, Concertricity:≤0.5um | |
| 126.0+1/-0um, Concertricity:≤1.0um | 126.0+1/-0um, Concertricity:≤0.5um | |
Cable Scope | 2.0mm/3.0mm/3.0*2.0mm drop cable |
Optical fiber diameter | 125μ m ( 652 & 657 ) |
Tight buffer diameter (μ m) | 900μ m |
Fiber mode | Single & multi mode |
Installation time | within 60s ( no fiber cut ) |
Insertion loss | ≤ 0.3dB(1310nm & 1550nm) |
Return loss | > 55dB |
Fastening strength of naked fiber | > 5N |
Fastening strength of naked fiber holder | > 10N |
Tensile strength | > 50N |
Working Temperature | -40~+75 |
Features:
1. Eliminates cable excess length and pigtail splice storage
2. Factory-installed fiber stub
3. No epoxy or polishing required
4. Quick and easy fiber termination in the field
5. No tool is required for the installation
6. Cost effective
Application:
Patch Panels sc apc upc sumitomo fast connector
Distribution frames sc apc upc sumitomo fast connector
Maintenance or emergency restoration of fiber networks
SC APC SC UPC Sumitomo Fast Connector SM MM Fiber Optic Sumitomo
Fast Connector
FTTH outlets, sc apc upc sumitomo fast connector etc.
Packing:
Note:
when installation, the operator should keep their hands clean and
dry, open the peeling cable or strip the coating layer, please use
good quality tools to reduce the fiber section damage.When cutting
quantitative fiber, please correct use the long-term guide slot,
and properly handle the waste fiber, so as to avoid the hurt of
person. Insert the fiber to the connector, pay attention to the
operation method and strength, so as to avoid the fiber break. Keep
the fiber slightly bent to lock the lock buckle assembly. Pay
attention to the construction site dust, too much dust may affect
the communication data
In order to reduce the light loss, it is recommended to peel off
the optical fiber coating and dip the dust with a small amount of
alcohol to wipe the fiber and wipe it clean. If necessary, please
repeat the cleaning, which can greatly reduce the light loss.
